G-Tools Grow Table for Ebb & Flow Tray 2 × 0.8 m

This G-Tools grow table is built specifically around the 2 × 0.8 m Danish ebb & flow tray format. It suits growers who want a tidy, height-optimised flood or drip system without fabricating their own bench.

The table holds a 2 × 0.8 m tray securely at a standing working height. The frame is tall enough to slide a water reservoir underneath, keeping your floor space clean and your irrigation circuit compact. Inlet and drain fittings connect directly to the tray, so plumbing the system takes minutes rather than hours.

Run it as a classic ebb & flow system by placing a submersible pump in the reservoir and wiring it to a digital timer. Set your flood intervals to match your growing medium - clay pebbles typically need two to four floods per day under a 600 W light. The drainage channels in the tray base let the rootzone drain completely between floods, maintaining the oxygen balance that fast-growing plants require.

Prefer hand-watering or dripper lines? The tray functions equally well as a passive catchment tray. Excess nutrient solution runs to the drain fittings rather than pooling around stems. This makes it straightforward to switch methods mid-cycle if your plants demand it, without buying a second piece of equipment.

Pair this table with a G-Tools or compatible 2 × 0.8 m ebb & flow tray, a suitable nutrient reservoir (a 50-100 litre tank fits most setups at this footprint), and a reliable digital timer. If you need to move the table between rooms or reposition it during a room rearrange, add the optional wheel kit - useful in any space where flexibility matters.

Grower’s Note: With ebb & flow on clay pebbles, keep each flood cycle short - typically 15 to 30 minutes is enough for the medium to saturate. Longer floods do not increase uptake and reduce oxygen time in the rootzone. Calibrate your timer to the ambient temperature: warmer rooms dry the medium faster and may need an extra flood cycle per day.

Priced at £424, with free UK delivery.