G-Tools Height Extension Set for Grow Rack 2 x 0.63
Add a full extra tier to your 2 x 0.63 grow rack, gaining 40.5 cm of vertical growing space per level.
Key Features
- Adds exactly 405 mm of height per extension tier
- Includes one tray frame sized for the 2 x 0.63 ebb and flow tray
- Includes four corner uprights - all hardware supplied
- Frame rails act as integrated lighting-mount points for the tier below
- Unlimited tiers possible - constrained only by ceiling height
- Designed exclusively for the G-Tools 2 x 0.63 modular grow rack
- Expands canopy area without increasing floor footprint
- Compatible with Sanlight LED panels for verified PPFD coverage
This height extension set is the single most efficient way to increase your G-Tools 2 x 0.63 grow rack's productive capacity. If your grow room has headroom to spare, this kit lets you add tier after tier without buying a second rack or rearranging your entire space.
The extension set is designed exclusively for the G-Tools 2 x 0.63 modular grow rack. It consists of a correctly dimensioned frame for the 2 x 0.63 ebb and flow tray plus four uprights. Every component is pre-matched to the base unit, so installation is straightforward - no cutting, drilling, or improvising brackets.
Each tier adds 405 mm to the overall rack height. In a room with a 2.4 m ceiling, for example, you can comfortably accommodate a three-tier configuration. Growing area effectively doubles or trebles on the same floor footprint. That matters in smaller facilities where floor space is the primary constraint.
The frame rails are not just structural. They also serve as the mounting points for your lighting on the tier beneath. This keeps cabling tidy and lamp positioning consistent. Pair each tier with a Sanlight EVO or Q-series LED panel for efficient, full-spectrum coverage across the tray. G-Tools publish PPFD data for each compatible lamp type, so you can verify light intensity targets before purchasing.
This extension set suits growers running ebb and flow or flood-and-drain schedules who want to scale production without increasing their room's physical footprint. It is equally relevant to propagation setups, where a lower-intensity tier can be dedicated to clones while upper tiers run full-power veg or flower lighting.
Grower’s Note: When stacking multiple tiers, think carefully about airflow. Each additional level restricts vertical air movement, so position a clip fan or ducted intake to ensure fresh air reaches lower canopies. Ensure your nutrient pump and reservoir capacity are also scaled up accordingly - a three-tier ebb and flow system can flood two to three times the tray volume of a single-tier setup.
Priced at £439, with free UK delivery.
- Adds exactly 405 mm of height per extension tier
- Includes one tray frame sized for the 2 x 0.63 ebb and flow tray
- Includes four corner uprights - all hardware supplied
- Frame rails act as integrated lighting-mount points for the tier below
- Unlimited tiers possible - constrained only by ceiling height
- Designed exclusively for the G-Tools 2 x 0.63 modular grow rack
- Expands canopy area without increasing floor footprint
- Compatible with Sanlight LED panels for verified PPFD coverage
Dimensions
C: Height
40.5 cm per tier added