G-Tools Grow Table for Ebb & Flow Tray 1.1m x 1m with Mounting Bracket

**The G-Tools Grow Table gives you a purpose-built aluminium frame sized exactly for a 1.1m x 1m ebb and flow tray. It suits growers who want a clean, organised setup with lighting, airflow, and irrigation all in one dedicated structure.**

This table is designed around ebb and flow growing from the ground up. The 1.1m x 1m surface matches the corresponding G-Tools tray dimensions precisely, so there is no overhang and no wasted floor space. Aluminium tube construction keeps the frame light without sacrificing rigidity under the weight of a full tray and growing medium.

The overhead mounting bracket is one of the most practical features here. You can hang your LED panel directly above the canopy, clip on circulation fans, and fix a SCROG net at the correct height - all from the same frame. That removes the need for separate lighting gantries or fan brackets and keeps your grow room tidy.

Below the table surface there is deliberate clearance for a water tank and pump. Running your nutrient reservoir underneath the tray shortens the feed and drain pipe runs, which reduces the risk of leaks and makes maintenance straightforward. It also keeps the reservoir away from light, which helps prevent algae growth inside the tank.

The system is genuinely modular. Run a single table independently for a compact grow, or link several units together to fill a larger room. The optional wheel kit is worth considering if you need to move the table for cleaning or inspection - it fits directly onto the existing frame with no modification.

Grower’s Note: With ebb and flow systems, keep your reservoir capacity at least 1.5 times the tray volume to ensure full flooding without running the pump dry. Position your water level sensor at the lowest drain point of the tray, not at the reservoir, so flood depth stays consistent across every irrigation cycle.

Priced at £209, with free UK delivery.