G-Tools Grow Table for Ebb & Flow Tray 2 × 1 m with Mounting Bracket
Aluminium 2 × 1 m grow table with overhead mounting bracket - assembled in under ten minutes.
Key Features
- Table size: 2 × 1 m - matches standard 200 × 100 cm ebb and flow trays
- Aluminium tube frame - corrosion-resistant in humid grow-room conditions
- Overhead rail runs the full length for lights, fans, and training nets
- Under-table clearance accommodates a nutrient reservoir and pump
- Assembles in approximately ten minutes with basic tools
- Modular - integrates with additional tables for larger flood-and-drain arrays
- Compatible with optional castors for mobile repositioning
- Mounting bracket included in the box - no separate purchase needed
This aluminium grow table is purpose-built to support a 2 × 1 m ebb and flow tray and the full infrastructure around it. It suits growers who want a structured, expandable flood-and-drain setup without fabricating their own metalwork.
The table itself measures 2 × 1 m - a direct match for a standard 200 × 100 cm ebb and flow tray. The aluminium tube frame is rigid enough to bear a full tray of growing medium, flooded with nutrient solution, without flexing. Aluminium won't rust, so it handles the damp conditions typical of a busy flood-and-drain cycle without degrading over time.
The overhead tube construction is one of the most practical features here. Run your LED bar or HPS fixture along the top rail and adjust height without ceiling fixings. Clip fans attach in seconds, keeping air moving through the canopy. A SCROG net threads through the frame naturally, giving you a ready-made training structure at the same height as your lights.
Underneath the table there is enough clearance to house a nutrient reservoir and a submersible pump. Keeping the tank directly below the tray shortens the feed pipe run, reduces priming issues, and keeps your floor space tidy. If you plan to run an automatic timer-controlled flood cycle, this layout makes plumbing straightforward.
Multiple tables link together for larger grow rooms. Each unit operates independently, so you can stagger flood cycles or run different nutrient formulations in separate bays. Add castors and a full table becomes mobile - useful when you need to move plants for inspection or deep cleaning. Pair this table with a matching G-Tools ebb and flow tray, an appropriately sized LED fixture such as a Sanlight EVO bar, and a quality inline fan for climate control.
Grower’s Note: With ebb and flow systems, the height of your reservoir outlet relative to the tray drain matters. Keep the return pipe short and unkinked, and set your flood depth to no more than two-thirds of your pot or slab height to avoid waterlogging roots. A timer-controlled flood of 15-30 minutes, two to four times daily during lights-on, suits most crops in a 2 × 1 m tray.
Priced at £411, with free UK delivery.
- Table size: 2 × 1 m - matches standard 200 × 100 cm ebb and flow trays
- Aluminium tube frame - corrosion-resistant in humid grow-room conditions
- Overhead rail runs the full length for lights, fans, and training nets
- Under-table clearance accommodates a nutrient reservoir and pump
- Assembles in approximately ten minutes with basic tools
- Modular - integrates with additional tables for larger flood-and-drain arrays
- Compatible with optional castors for mobile repositioning
- Mounting bracket included in the box - no separate purchase needed
Dimensions
A: Depth
100cm
B: Width
200cm