Automatic Watering System Advanced Kit for 8x6 Greenhouse

The 8x6 Advanced kit gives each of its 12 15L pots a separate 1Pot tray. This individual-pot layout suits peppers, chillies, aubergines and other bushy crops.

For mixed crops needing separate positions, this AutoPot automatic greenhouse irrigation system suits an 8x6 greenhouse. The greenhouse watering kit uses twelve individual 1Pot modules.

Each tray receives water by gravity from an external water butt or reservoir. No pump, mains water connection or electricity is needed.

Automatic watering is controlled by AQUAvalve5. The valve fills each tray with a shallow 20mm layer of water, then shuts off. It waits until the plants use that water before opening for another fill.

Product code: GH/8X6/121POT

What is included

• 12x 15L Pot
• 12x 15L 1Pot Tray and Lid with Grommet
• 12x AQUAvalve5
• 12x Square Root Control Disc
• 12x Marix Disc
• 1x 16mm Click Fit Filter
• 2 metres of 9mm Pipe
• 8 metres of 16mm Pipe
• 12x 16mm-9mm Tee Connector
• 3x 16mm Elbow Connector
• 1x 16mm In-Line Tap

What you still need

One external water butt or reservoir with at least 200L capacity is required. AutoPot recommends this minimum. The external water butt or reservoir is not included.

If the reservoir goes inside your greenhouse, allow space for it. One or two modules may need to be removed.

How to set it up

1. When positioning individual trays, we recommend checking each one sits flat on a firm, level surface.
2. Keep the external water butt or reservoir 150mm / 6 inches above the system.
3. Hand-water newly potted plants. Wait 7-28 days for roots to establish before turning the system on.
4. Flush the pipework weekly.