G-Tools Grow Table for Ebb & Flow Tray 0.52 x 0.52 m with Mounting Bracket

**The G-Tools 0.52 x 0.52 m Grow Table gives you a purpose-built aluminium base for ebb & flow cultivation, ready in under ten minutes. It suits growers who want a tidy, integrated setup - lighting, irrigation, and canopy training hardware all in one place.**

This table is engineered specifically for 520 x 520 mm ebb & flow trays. The aluminium frame keeps weight low without sacrificing rigidity. A horizontal tube bar runs above the growing surface. You can hang LED panels, clip-on fans, or attach a scrog net directly to it - no extra rigging required.

Beneath the table surface there is deliberate clearance for a water reservoir. This keeps your nutrient tank out of the way but close enough for short pump runs. Shorter tubing runs reduce dead volume and make priming simpler. The whole nutrient delivery system stays compact and manageable.

Assembly is straightforward. The mounting bracket is included, and the construction goes together in around ten minutes. The table works equally well as a single standalone unit or as part of a larger, multi-station growing area. G-Tools also offer a wheeled version of this table if you need to reposition plants or access the reservoir easily.

Pair this table with a compatible 520 x 520 mm G-Tools ebb & flow tray and a Sanlight LED panel sized for roughly 0.27 m² of canopy. A small clip fan mounted to the overhead bar will maintain air movement directly over the canopy. The result is a neat, self-contained growing station that scales cleanly if you add further units later.

Grower’s Note: With ebb & flow systems, flood duration and frequency depend on your growing medium. Clay pebbles typically need two to four short floods per day under HID or LED; rockwool may need fewer. Keep your reservoir positioned level with or slightly below the tray drain fitting so the table drains fully by gravity every cycle - stagnant water at the roots encourages pythium.

Priced at £195, with free UK delivery.