G-Tools Bonanza Clima Grow Box 0.35m²
A compact 0.35m² aluminium grow box with built-in extraction, carbon filtration, and internet-enabled climate control - sold light-ready.
Key Features
- Growing area: 0.35m²
- Supports 1-5 plants, hand-watered or with optional 3-in-1 irrigation system
- Shell: aluminium profiles, plastic insert connectors, PVC/XPS sandwich panels
- Integrated compact fan, PK K2600 carbon filter, and silencer - rated up to 250W lighting
- Operating noise: 45dB at 1m with doors closed
- Internet-enabled control box for remote lighting schedule management
- Lockable swing doors for secure, discreet access
- Light-reflecting, thermally and acoustically insulating interior panels
- Carbon filter replacement interval: approximately 12 months continuous use
The G-Tools Bonanza Clima 0.35m² is a ready-to-grow cabinet designed for vegetables, herbs, and flowering plants in limited spaces. It suits beginners and experienced growers who want a tidy, contained setup without building a custom grow room.
The Bonanza Clima arrives with everything except the light. The cabinet includes a compact extraction fan, a PK K2600 carbon filter, a silencer, passive air inlets, and an internet-enabled control box. You set lighting schedules remotely - useful if you travel or work irregular hours. All you need to add is your chosen lamp and, optionally, a 3-in-1 irrigation system.
The shell is built from aluminium profiles joined by plastic insert connectors, with PVC/XPS sandwich panels filling each section. These panels insulate against heat and sound, and their reflective inner surface helps bounce light back onto your canopy. The lockable swing doors seal the cabinet neatly when closed. At 45dB measured at 1 metre with doors shut, it is genuinely quiet for a filtered extraction setup.
The extraction system is sized for lighting up to 250W. Air is drawn through the PK K2600 carbon filter before it leaves the cabinet, so odours are scrubbed at source rather than filtered externally. The carbon filter will saturate after roughly 12 months of continuous use and can be swapped out yourself - replacement filters and long cable ties are available separately in our store.
For lighting, G-Tools recommends specific lamps sized for the 0.35m² canopy area - we stock these and can ship from the UK. A Sanlight EVO or Q-series LED panel is a natural pairing: low heat output suits a small enclosed cabinet, and the precise spectrum suits flowering crops including tomatoes, peppers, and cannabis. Hand-watering works well in this footprint, but the optional 3-in-1 irrigation system removes the daily routine entirely.
Grower’s Note: In a 0.35m² cabinet, heat management is the primary challenge. Keep your lamp wattage within the 250W ceiling the extractor is rated for. If you run an LED below that ceiling, the extraction will more than cope, and you may find temperatures easier to maintain in summer. Train plants low - topping or LST works well - to keep canopy height under control within the cabinet's fixed interior dimensions.
Priced at £1,095, with free UK delivery.
- Growing area: 0.35m²
- Supports 1-5 plants, hand-watered or with optional 3-in-1 irrigation system
- Shell: aluminium profiles, plastic insert connectors, PVC/XPS sandwich panels
- Integrated compact fan, PK K2600 carbon filter, and silencer - rated up to 250W lighting
- Operating noise: 45dB at 1m with doors closed
- Internet-enabled control box for remote lighting schedule management
- Lockable swing doors for secure, discreet access
- Light-reflecting, thermally and acoustically insulating interior panels
- Carbon filter replacement interval: approximately 12 months continuous use
