Sanlight Flex II Extension Cord 0.6 m
60 cm daisy-chain cable purpose-built for Sanlight Flex 10 and Flex 20 multi-tier growing systems.
Key Features
- Cable length: 0.6 m (600 mm)
- Compatible fixtures: Sanlight Flex 10 and Flex 20
- Purpose: tier-to-tier daisy-chain interconnection
- Connection type: proprietary Sanlight Flex II plug
- No tools required for fitting
- Official Sanlight accessory - maintains fixture warranty
- Designed for multi-layer vertical growing systems
- Allows multiple Flex panels to run from one power source
The Sanlight Flex II Extension Cord 0.6 m is the missing link for anyone building a multi-tier indoor growing system around Flex 10 or Flex 20 lights. If your shelves are close-pitched and you want a clean, factory-approved daisy-chain connection between floors, this is the cable to order.
Multi-layer growing systems live and die by neat cable management. When you stack two or three tiers of Sanlight Flex panels, the gap between each shelf is typically modest - and a generic extension cable is always too long or, worse, too short. At 0.6 m this cord is sized to bridge a standard tier gap without leaving a tangle of excess cable draped across your canopy.
The Flex II series uses a proprietary connection system, so only official Sanlight cables maintain a secure, rattle-free join between fixtures. Third-party leads risk a loose fit that introduces resistance or connection issues over time. Using this cord keeps every joint solid and preserves the Sanlight warranty on your Flex 10 or Flex 20 units.
Installation is genuinely quick. Plug one end into the output port of the first Flex panel and the other into the input port of the fixture on the next tier. There is no wiring, no crimping, and no need to consult an electrician. The daisy-chain approach means you can power multiple panels from a single mains connection, reducing socket clutter in your grow space.
Order one cord per tier gap in your system. A three-tier rack with Flex panels on each floor needs two of these cables. If your shelf spacing differs significantly from 0.6 m, Sanlight also produces alternative lengths - so measure your rack before purchasing to make sure this cord is the right fit.
Grower’s Note: In multi-tier setups, keep extension cords routed along the side rails of your racking rather than across the growing area. This protects the cable from moisture, keeps the canopy unobstructed, and makes it far easier to adjust light height on individual tiers without straining the connector joints.
Priced at £36, with free UK delivery.
- Cable length: 0.6 m (600 mm)
- Compatible fixtures: Sanlight Flex 10 and Flex 20
- Purpose: tier-to-tier daisy-chain interconnection
- Connection type: proprietary Sanlight Flex II plug
- No tools required for fitting
- Official Sanlight accessory - maintains fixture warranty
- Designed for multi-layer vertical growing systems
- Allows multiple Flex panels to run from one power source