Sanlight Flex II 60W Adapter

The Sanlight Flex II 60W Adapter is the dedicated driver unit for the Flex II LED panel range. It suits growers who want to run multiple Flex II fixtures from a single, organised power source.

The Flex II 60W Adapter is designed to power combinations of Flex II panels up to a total draw of 60W. You can run 2 x Flex II 25W panels, 3 x Flex II 20W panels, or 6 x Flex II 10W panels from this one unit. That flexibility makes it easy to match your lighting layout to your canopy without needing a separate driver per fixture.

Keeping cabling tidy inside a grow cabinet matters more than most growers expect. A single adapter reduces cable clutter, lowers the number of sockets you occupy, and makes fault-finding straightforward. The included adapter cable means you can begin wiring your Flex II setup immediately.

This adapter is the correct pairing if you are building out a Flex II lighting system for a small to mid-sized grow space. It works particularly well inside G-Tools grow cabinets, where keeping driver heat outside the canopy zone is a practical advantage. Position the adapter outside the tent or cabinet where possible to reduce heat load on your plants.

If your total Flex II wattage exceeds 60W, Sanlight offer other adapter ratings within the series. Plan your panel count before purchasing so you select the right driver from the outset. Mixing panel wattages on one adapter is possible provided the combined draw stays within the 60W limit.

Grower’s Note: LED drivers generate heat during operation. Mounting this adapter outside your grow cabinet or on a well-ventilated surface helps it run cooler and last longer. Avoid coiling the adapter cable tightly during use, as bundled cables can trap heat and degrade insulation over time.

Priced at £66, with free UK delivery.