Sanlight Flex II 25W Power Adapter

The Sanlight Flex II 25W Adapter is the dedicated driver for the Flex II panel range. It suits growers running a single Flex II 25W or 20W, or anyone pairing two Flex II 10W lights on one circuit.

The Flex II series uses external adapters rather than built-in drivers. This keeps the light panels slim and light. The 25W adapter is the correct match for the upper end of the Flex II range.

You can run one Flex II 25W or one Flex II 20W from this adapter without any additional hardware. Alternatively, connect two Flex II 10W panels together - the total draw stays within the adapter's 25W capacity.

An adapter cable is included in the box. There is no need to source separate leads or adaptors. Plug in and hang your Flex II panel straight away.

If you are building a modular propagation or supplemental lighting setup, this adapter keeps wiring neat. One power socket handles multiple small panels. That matters in tight propagators, grow tents, or mother-plant areas where cable management is limited.

Grower’s Note: Running two Flex II 10W panels from a single 25W adapter is an efficient way to spread even light across a wider propagation tray. Position the two panels side by side at the recommended hanging height to minimise hotspots and give cuttings or seedlings consistent coverage from the start.

Priced at £54, with free UK delivery.