G-Tools PK 125 EC-TC Inline Fan + Prima Klima K1604 Carbon Filter Bundle680 m³/h
125mm EC inline fan paired with a coconut-shell carbon filter, rated to 680 m³/h for odour-free growing.
Key Features
- Fan airflow: 680 m³/h at 125 mm
- Motor: ZIEHL-ABEGG EC type, very low power consumption
- Impeller: backward-curved blades for high speed with low noise
- Housing: flame-proof, high-impact polyamide (nylon), fully integrated controls
- Filter airflow range: 460-700 m³/h (K1604 Industry Line)
- Carbon bed depth: 40 mm activated coconut-shell carbon
- Estimated carbon lifespan: up to 24 months (replace at 12 months recommended)
- Filter inner frame: metal construction for structural stability
- Standard fit in G-Tools Wing cabinet series
The PK 125 EC-TC paired with the Prima Klima K1604 is a complete 125 mm ventilation solution for grow spaces up to roughly 4 m². It suits growers who need near-silent extraction with precise climate control and zero compromise on odour removal.
At the heart of this bundle is a ZIEHL-ABEGG EC motor. EC technology means the motor converts power to airflow far more efficiently than a standard AC fan. The result is lower electricity bills and less heat added to your grow space. The fan's backward-curved impeller maintains strong static pressure even when the speed is reduced, so airflow through your ducting stays consistent.
The integrated controller handles both fan speed and temperature response. You set a target temperature; the fan ramps up or down automatically. There is no separate speed controller to wire in and no humming when the fan is dimmed - a common frustration with traditional inline fans. All connections and the capacitor sit inside the polyamide housing, keeping the installation tidy and the electrics protected.
The Prima Klima K1604 filter covers a 460-700 m³/h range, which brackets the fan's 680 m³/h output perfectly. The 4 cm carbon bed is packed with activated carbon derived from coconut shells. Coconut-shell carbon has a dense micropore structure that excels at trapping volatile organic compounds. The metal inner frame stops the carbon bed from shifting or compressing, which would create bypass channels and reduce effectiveness.
This pairing is the standard ventilation fit used inside the G-Tools Wing cabinet series. If you are building a tent or cabinet around a similar footprint, this bundle is a proven starting point. Connect with 125 mm ducting, mount the filter inside the canopy, and run the fan outside or above the growing area. Keep the carbon bed dry - humid air above 70 % RH shortens its service life noticeably.
Grower’s Note: Plan to replace the carbon bed every 12 months under normal growing conditions, even though the activated carbon can technically last up to 24 months. Odour control tends to degrade gradually, and you often notice the drop only once smell has already escaped. In humid rooms above 65 % RH, vacuum the pre-filter sleeve monthly to stop moisture-laden dust from clogging the outer carbon layer prematurely.
Priced at £385, with free UK delivery.
- Fan airflow: 680 m³/h at 125 mm
- Motor: ZIEHL-ABEGG EC type, very low power consumption
- Impeller: backward-curved blades for high speed with low noise
- Housing: flame-proof, high-impact polyamide (nylon), fully integrated controls
- Filter airflow range: 460-700 m³/h (K1604 Industry Line)
- Carbon bed depth: 40 mm activated coconut-shell carbon
- Estimated carbon lifespan: up to 24 months (replace at 12 months recommended)
- Filter inner frame: metal construction for structural stability
- Standard fit in G-Tools Wing cabinet series