Automatic Watering System Ultimate Kit for 8x6 Greenhouse

The 8x6 Ultimate kit pairs 20 15L pots across 10 easy2grow trays. These larger pots give climbing crops more room to grow. They suit tomatoes, cucumbers and melons.

This AutoPot greenhouse watering kit fits an 8x6 greenhouse and suits heavier-feeding climbing crops. Its automatic greenhouse irrigation system has twenty 15L pots that sit in ten paired easy2grow trays.

A separate water butt or reservoir supplies the trays by gravity. There is no pump to run. The system needs no mains water connection or electricity.

AQUAvalve5 fills each tray automatically to a shallow 20mm water depth, then stops the supply. The plants use this water before the valve opens again. Gravity supplies the next tray fill.

Product code: GH/8X6/E2G15

What is included

• 20x 15L Pot
• 10x 2Pot Tray and Lid
• 10x AQUAvalve5
• 20x Square Root Control Sock
• 20x Marix Disc
• 1x 16mm Click Fit Filter
• 2 metres of 9mm Pipe
• 8 metres of 16mm Pipe
• 10x 16mm-9mm Tee Connector
• 3x 16mm Elbow Connector
• 1x 16mm In-Line Tap

What you still need

Arrange one external water butt or reservoir with a capacity of at least 200L. This is AutoPot's recommended minimum. The external water butt or reservoir is not included.

An indoor reservoir needs space within your greenhouse layout. You may need to remove one or two modules to accommodate it.

How to set it up

1. We recommend checking the surface before placing the trays. It must be firm and level, with every tray flat.
2. Set the external water butt or reservoir 150mm / 6 inches above the system.
3. Water newly potted plants by hand. Wait 7-28 days for root establishment before turning on the system.
4. Flush the pipework every week.