Automatic Watering System Plus Kit for 8x10 Greenhouse
This 8x10 mixed-crop kit has two Tray2Grow modules and 23 individual or paired pots.
Key Features
- Suggested mixed-crop layout for an 8x10 greenhouse
- Two Tray2Grow, nine 1Pot and seven easy2grow modules
- Nine 15L pots and 14 8.5L pots supplied
- Tray2Grow accepts pots, seed trays, grow bags or a compatible fabric planter
- Gravity-fed watering without pumps or electricity
- 30L reservoir with lid and grommet included
- Two external 200L reservoirs required, 400L total, not included
The 8x10 Plus kit combines 23 supplied pots with two Tray2Grow modules. Nine individual 1Pot trays each hold a 15L pot. Seven easy2grow trays hold 14 8.5L pots in pairs.
Tray2Grow, 1Pot and easy2grow modules give this greenhouse watering kit a mixed layout. We recommend the AutoPot automatic greenhouse irrigation system for an 8x10 greenhouse with a varied crop plan.
The individual pots suit bushy crops such as peppers, chillies and aubergines. The paired pots suit tomatoes, cucumbers, melons and other climbing crops.
Use Tray2Grow with pots, seed trays, grow bags or a compatible fabric planter. Separate water butts or reservoirs feed the system by gravity. No pump or electricity is needed.
AQUAvalve5 automatically admits a shallow 20mm layer of water into each tray, then shuts off. Once the plants use that water, the valve opens again to refill the tray.
Product code: GH/8X10/2T2G9P14E2G
What is included
- 2x Tray2Grow Complete
- 9x 15L Pot
- 9x 1Pot Tray and Lid with Grommet
- 14x 8.5L Pot
- 7x 2Pot Tray and Lid
- 16x AQUAvalve5
- 9x Square Root Control Disc
- 14x Square Root Control Sock
- 23x Marix Disc
- 3x 16mm Click Fit Filter
- 4 metres of 9mm Pipe
- 11 metres of 16mm Pipe
- 17x 16mm-9mm Tee Connector
- 1x 16mm Tee Connector
- 5x 16mm Elbow Connector
- 1x 30L Reservoir with Lid and Grommet
- 3x 16mm In-Line Tap
What you still need
The kit includes a 30L reservoir with its lid and grommet. You also need two separate external 200L water butts or reservoirs, with 400L capacity in total. These external water butts or reservoirs are not included.
Seed trays, grow bags and compatible fabric planters must be supplied separately if used with Tray2Grow.
Plan space for any reservoir positioned inside the greenhouse. You may need to remove one or two modules.
How to set it up
- When fitting the mixed layout, we recommend a firm, level surface. Check each tray sits flat.
- Position each external water butt or reservoir 150mm / 6 inches above the system.
- Hand-water plants after first potting up. Wait 7-28 days for roots to establish before turning on the system.
- Flush the pipework weekly.
- Suggested mixed-crop layout for an 8x10 greenhouse
- Two Tray2Grow, nine 1Pot and seven easy2grow modules
- Nine 15L pots and 14 8.5L pots supplied
- Tray2Grow accepts pots, seed trays, grow bags or a compatible fabric planter
- Gravity-fed watering without pumps or electricity
- 30L reservoir with lid and grommet included
- Two external 200L reservoirs required, 400L total, not included

















