Automatic Watering System Essential Kit for 8x10 Greenhouse
Two Tray2Grow modules sit alongside 20 pots in this 8x10 mixed-growing kit.
Key Features
- Suggested mixed-growing layout for an 8x10 greenhouse
- Two Tray2Grow, 12 1Pot and four easy2grow modules
- 12 supplied 15L pots and eight supplied 8.5L pots
- Tray2Grow accepts pots, seed trays, grow bags or a compatible fabric planter
- Automatic gravity-fed watering without pumps or electricity
- 30L reservoir with lid and grommet included
- Separate external reservoir required: at least 200L, not included
The 8x10 Essential kit has 12 individual 15L pots, eight paired 8.5L pots and two Tray2Grow modules. Each 15L pot has a 1Pot tray. Four easy2grow trays each hold two 8.5L pots.
In an 8x10 greenhouse, this AutoPot automatic greenhouse irrigation system suits propagation, mixed crops and climbing crops. Tray2Grow, 1Pot and easy2grow modules make up the greenhouse watering kit.
Use the individual pots for bushy crops such as peppers, chillies and aubergines. The paired pots suit tomatoes, cucumbers, melons and other climbing crops.
Tray2Grow can hold pots, seed trays, grow bags or a compatible fabric planter. A separate water butt or reservoir supplies the system by gravity. No pump or electricity is required.
AQUAvalve5 controls watering automatically with a shallow 20mm layer of water in each tray. The valve closes after filling. It reopens after the plants have used the water.
Product code: GH/8X10/2T2G12P8E2G
What is included
- 2x Tray2Grow Complete
- 12x 15L Pot
- 12x 1Pot Tray and Lid with Grommet
- 8x 8.5L Pot
- 4x 2Pot Tray and Lid
- 16x AQUAvalve5
- 12x Square Root Control Disc
- 8x Square Root Control Sock
- 20x Marix Disc
- 1x 16mm Click Fit Filter
- 4 metres of 9mm Pipe
- 9 metres of 16mm Pipe
- 17x 16mm-9mm Tee Connector
- 1x 16mm Tee Connector
- 3x 16mm Elbow Connector
- 1x 30L Reservoir with Lid and Grommet
- 2x 16mm In-Line Tap
What you still need
A 30L reservoir with its lid and grommet is supplied. One separate external water butt or reservoir of at least 200L is also required. The external water butt or reservoir is not included.
Supply seed trays, grow bags or a compatible fabric planter separately for those Tray2Grow uses.
If you keep a reservoir inside the greenhouse, allow room for it. You may need to remove one or two modules.
How to set it up
- When arranging these modules, we recommend a firm, level surface. Check every tray sits flat.
- Set the external water butt or reservoir 150mm / 6 inches above the system.
- Water plants by hand when first potted up. Wait 7-28 days for roots to establish before turning on automatic watering.
- Flush the pipework every week.
- Suggested mixed-growing layout for an 8x10 greenhouse
- Two Tray2Grow, 12 1Pot and four easy2grow modules
- 12 supplied 15L pots and eight supplied 8.5L pots
- Tray2Grow accepts pots, seed trays, grow bags or a compatible fabric planter
- Automatic gravity-fed watering without pumps or electricity
- 30L reservoir with lid and grommet included
- Separate external reservoir required: at least 200L, not included

















