Automatic Watering System Complete Kit for 10x12 Greenhouse
This 10x12 kit pairs 48 15L pots across 24 easy2grow watering trays.
Key Features
- Suggested 10x12 layout for climbing crops
- 24 easy2grow modules holding 48 pots
- 15L capacity per supplied pot
- Two pots share each tray
- AQUAvalve5 controls automatic 20mm tray fills
- No pump, mains water connection or electricity required
- External reservoir required: at least 200L, not included
The 10x12 Complete kit uses 48 15L pots across 24 easy2grow trays. Each tray holds a pair of pots. These larger pots give tomatoes, cucumbers, melons and other climbing crops more room.
The greenhouse watering kit pairs thirty 15L pots across fifteen easy2grow trays. We recommend this AutoPot automatic greenhouse irrigation system for heavier-feeding climbing crops in a 10x12 greenhouse.
A separate water butt or reservoir feeds the trays by gravity. The system runs without a pump, mains water connection or electricity.
AQUAvalve5 controls watering automatically. It admits a shallow 20mm layer of water into each tray, then closes the supply. The plants use that water before the valve opens for the next fill.
Product code: GH/10X12/E2G15
What is included
- 48x 15L Pot
- 24x 2Pot Tray and Lid
- 24x AQUAvalve5
- 48x Square Root Control Sock
- 48x Marix Disc
- 1x 16mm Click Fit Filter
- 5 metres of 9mm Pipe
- 14 metres of 16mm Pipe
- 24x 16mm-9mm Tee Connector
- 2x 16mm Tee Connector
- 5x 16mm Elbow Connector
- 3x 16mm In-Line Tap
What you still need
Arrange one external water butt or reservoir of at least 200L. AutoPot recommends this minimum capacity. The external water butt or reservoir is not included.
If you position the reservoir inside the greenhouse, leave room for it. You may need to remove one or two modules.
How to set it up
- We recommend a firm, level surface for this paired-pot layout. Check all trays sit flat.
- Set the external water butt or reservoir 150mm / 6 inches above the system.
- Hand-water the plants when first potted up. Give roots 7-28 days to establish before switching the system on.
- Flush the pipework weekly.
- Suggested 10x12 layout for climbing crops
- 24 easy2grow modules holding 48 pots
- 15L capacity per supplied pot
- Two pots share each tray
- AQUAvalve5 controls automatic 20mm tray fills
- No pump, mains water connection or electricity required
- External reservoir required: at least 200L, not included















